Never , mind , found an old one in the garage

Similarly, I think I should one or two on my part's bin, will confirm post work.

I’ve got two Kissena jerseys with Redbeard logos for sale. DM me on slack.

Short sleeve, race cut with collar, not sure of line, size large, $40.



Long sleeve fleece lined with collar, size small, $40.

Anybody interested in this ,$20 ?

@Mark Taylor  If that's the Silca Seat Roll Asymetrico, I'm interested.  

@mugwump
it is that , pics here , it’s wet in the pics , needs a clean but still good 

I'm looking to get into gravel racing and maybe to try cyclocross. Is anyone maybe selling a used bike, size 52ish, that could work for both?

Mark Taylor said:

@mugwump
it is that , pics here , it’s wet in the pics , needs a clean but still good 

JP , let me know if you want it , it’s going on eBay otherwise 

DavidVibert said:

I'm looking to get into gravel racing and maybe to try cyclocross. Is anyone maybe selling a used bike, size 52ish, that could work for both?

Budget? With our Hilltop discount there are some diverge models that may good options for adventure and occasional cross riding.

if you are heading towards the hilltop brand new bike the crux is a better option 

A friend got a set of Schwalbe One Tubeless 700c x 30.  He ordered 28.  Alas. He's trying to sell them because that seems easier than sending them back.

He's looking for $110.  Rob@robstern.com

Small Skinsuit! Only worn twice. Has couple small holes from pins on the back. Two pocket design. Make me an offer

How do you fit into a small skinsuit? Aren't you too tall for such a small garment?

PatrickGrehan said:

How do you fit into a small skinsuit? Aren't you too tall for such a small garment?

Patrick,

FWIW, I wear an XS in Champ-Sys skinsuits.  The harder it is to get in, the faster it is.  

Skinsuit, worn only once...

https://www.cyclingweekly.com/news/latest-news/sandpaper-saddle-injury-adds-to-pain-of-tony-martins-world-championships-defeat-192829

Just found a couple old lenses compatible with the Rydon frame from Rudy Project.  Free to anyone what wants them.  I used to wear these glasses when I was young(er) and fast(er), and have since switched to my prescription Warby Parkers Just shoot me a DM.

Hi hi,

I am looking to buy an alloy rim brake wheelset -- ideally, tubeless or that can be converted to tubeless. Shimano/HG 11 compatible. 

-- short story long: Croton Cross destroyed the wheelset I had on the "pit" bike. I could replace the bearings, but based on how little I've ridden that bike/wheels, not sure it is worth the effort. Any other kinda rain, mud, wet, would likely destroy anything I put in those hubs. Also, while I managed to make them tubeless, I've never been sure these were actually designed tubeless, haha.

Please let me know if you have anything lying around or any online deals you might know. Thanks!

Eloy I have an old set of Shimano Carbon tubs, just gathering dust in my basement...

@eloy  Two things.  

1. I've found bearing replacement pretty easy for the most part.  And bearings are relatively cheap.  The trickiest install for me has been the cassette body.  I do have a cheap bearing press from Boca Bearings if you want to try.

2. Tubeless rims.  They're actually pretty easy to tell apart from tubed.  Tubeless rims have a trough in the middle of the cavity and the tire often makes a snapping noise when moving from the trough to the shelf.  Tubed rims have a fairly flat cavity from sidewall to sidewall.

Thanks, both:

@Jules Thanks, I do actually have a set of rim brake tubular wheels, if I glued something to them, they could solve the problem. But as this is the pit bike, it mostly sits in the basement -- I've ridden it maybe 3 hours total since 2019. So tubulars would hold for a season or two, but then need to be reglued, etc... not sure worth the effort. Tubeless gets 90% there, and is easier to reset when cross comes around.

@mugwump I can replace the bearings, but just the way these fulcrum hubs are, the cartridges are not very protected -- the dust caps have a super wide opening for the axle, so basically anything can get in up to the seals

-- I moved the seals and added grease this week, I was surprised that there was zero grease. Granted, the conditions at Nationals and Croton were heavy, but that's almost all the riding I've done on them, I can't describe how gritty they still feel. My bet is that almost any other wheels would protect the bearings a little more. Although, you might be right, could be worth and fun to simply repair them.

In any case, if anyone has any alloy rim wheels around, lmk. Thanks!

Anyone need a trunk bike rack? I inherited a saris bones 3 bike rack from a member ages ago and don't need it anymore so looking to pass it on to someone who needs it now. Free!

Mark Taylor said:

I'm looking to sell a pair of hardly used ( i set them up for cross and ended up not racing anything)

Hunt 35 X wide (31mm) gravel wheels , Sram XD ,( you can purchase other freehubs from hunt) INCLUDES 12mm / 15mm adapters front axle, 12x142 rear

Center lock discs ,

looking for $500

https://us.huntbikewheels.com/products/hunt-35-carbon-gravel-x-wide-wheelset

Check your mailbox!!

BIKE HAS SOLD !!

WTB your used Wahoo or Garmin. My ELEMNT v2 crapped out and I'm left without a bike computer 😢

Lots of black friday offers on those

CX Tubulars:

Challenge Chicane x1
Team Edition Challenge Limus x2

Make me an offer

David Yang said:

WTB your used Wahoo or Garmin. My ELEMNT v2 crapped out and I'm left without a bike computer 😢

Starting next week, on November 15, hammerhead will reduce the price for the Karoo 2 from $399 to $299 -- I realize this is still steep, and while I love mine, and others kissenistas do too, it might not be for everyone. Still I highly recommend.

The roam V1 is $199 on competitive cyclist 

I’m selling a Lazer helmet size M , with soft bag , no scratches 
reasonable offers ,