Because I would rather give a teammate some dough than ebay:









Need a new or lightly used Shimano (105 or better) 10 speed cassette, 12-25 and new or lightly used chain. Anyone holdin?

Folks, this is the second time I'm posting this--I hope to the proper thread. My apologies if you're getting it two times.


The big item is my SRM crank and head unit. Though I'm also selling a Showers Pass rain jacket (new in bag) and Castelli WindFront tights, worn only a few times, and a bike stand good for holding it up in your apartment or when cleaning your bike.

SRM

The powermeter of choice for the pros. The crank is a square-taper (compatible with Campagnolo bottom brackets) 172.5 mm SRM crankarms on a SRM spider. Bolt circle diameter is 130mm The rings are 53/39 and from Stronglight (I believe). There are eight strain gauges in the SRM; accuracy is +- 2%

the head unit is SRM's PowerControl V aka PCV. It is wired and rechargeable. Included is the wiring for the bike, one wire leads to the bottom bracket, the other down to the fork, the upload USB cable, and the charger. The charger comes with different plugs so it is compatible around the world. Also comes with handlebar mount.

Also coming with the unit is SRM instruction manual and software, though you can easily download these for free on the web. The software is compatible with PCs, not macs. If you're a Mac person, can run Golden Cheetah, a freeware program, or iSmarttrain, or get a copy of a Windows OS and run it on Bootcamp or Fusion or Parallels. You can also run the popular WKO+ software on the windows OS.

The head unit's battery was replaced in July. the cranks' battery probably has 10,000 miles to go before it needs replacing. I calibrated the SRM before I took it off my bike, and can show you how to check the calibration. If need be, I can check it for you.

The unit is almost six years old, but has been well taken care of and serviced regularly. SRMs are made to last and last and last.

I'd like $1100. I'll also throw in a Campagnolo english-threaded bottom bracket.


Rain Jacket. Showers Pass Double-Century. Size Small. Color Orange. Waterproof/breathable material. pit zips, reflective elements. Nice jacket. It barely fits me. By that, It's just long enough, the arms are just long enough, and the torso of hte jacket fills up if I'm dressed for a cold day in winter.
http://www.showerspass.com/catalog/men/mens-jackets/mens-double-century
I'd like $80.

Castelli Leggerezza Windfront Bib Tight. Size Medium. THey have a castelli KISS chamois inside. Worn a few times. A bit big for me. I think the person who wears these needs to be either taller or wider than I am. Can try them on before you buy.
http://www.biketiresdirect.com/product/castelli-leggerezza-bib-tight?utm_campaign=products&utm_source=google&utm_medium=base
I'd like $90.

Dimension Adjustable Rear Stay Stand
Somehow, I mistakenly ordered two of these. I only need one. It's a simple stand you can use to keep your bike in one place, and/or use it to hold your bike up as you clean it. I use it for the latter.
http://www.outdoorgeardepot.com/product/Dimension-Adjustable-Rear-Stay-Stand-UL307SBLK.html
I'd like $15 for this.

Let me know if you have any interest soon. Will go up on eBay next week.

I'll be at the party. Can bring stuff with me.

JP

FS Castelli Volo Partial Jacket New with tags (medium) Would like 70 dollars.
Selling a white and black Castelli jacket. Size medium. Because it's a Castelli, I need a large. If you usually wear a small (or a medium but have a short torso), this size will be perfect for you (I weigh 160, I could wear it but the back is too short in riding position).
Great for 50-30°F.

You can see a picture here (click on View White/Black/Black)

http://montanacycling.com/product/castelli-volo-partial-jacket-58044-1.htm

FS: 58 CM Independent Fabrication Crown Jewel Frame/Fork
plus Thomnpson seatpost and Syncros stem
I have it listed on Ebay, but will pull it.
email off list if interested.
Eric

Independent Fabtication is sold

My Van Dessel Hellafaster is still for sale!

Good lord, somebody please buy this thing!

Includes:

frame (7005 aluminum), proprietary tapered full-carbon fork, proprietary full-carbon seatmast, FSA internal headset, Rival crank (172.5, 53/39), Rival front derailleur, GXP bottom bracket and extra derailleur hanger (taped to the steerer tube in these pictures).

a few scratches here and there (downtube, chainstay) but quite nice. also, it is a BB30 frame, but it currently has a threaded adapter installed. i am under the understanding that this can be removed. i liked this bike a lot, especially for park races and crits (stiff, aero and really efficient) but it is too small for me.

testrider.com review - 2009 bike of the year: http://www.pelotonmagazine.com/Tested-Bikes/video/8/107/Van-Dessel-Hellafaster-Video-Review_prerolldone

the frameset alone cost me $650 with our discount (down from $999)

I'd like $450 for the whole shebang

http://farm2.static.flickr.com/1070/5119420224_df968ebacb.jpg

http://farm5.static.flickr.com/4012/5119420016_c66242b776.jpg

http://farm5.static.flickr.com/4059/5119420736_223ce4628f.jpg

call for shimano shifters.

I am trying to build up my 2011 bike out of a bunch of mismatched parts. I have a 7800 d/a rear derailleur, a chain and a cassette to match, and an FSA gossemer crankset w/ bottom bracket. I have two 105 shifters, and they are both OEM and compatible with the "older" derailleur, but the left one is like twice the size of the right.

anyone have anything they might be willing to part with?

reposting for James Gironta (JGiro on this forum or jgironta@mac.com):

*******************************************************

Catlike Whisper Helmet

New in the box white size large $200 never used

*******************************************************

here's a picture of the offending item i found on the internet - not the ACTUAL helmet but the same model and color (i think)

http://www.roadcyclinguk.com/news/images/catlike-whisper-hi.jpg

reposting for Stéphane:

******************************
Great deal at Coloradocyclist.com
Reynolds DV46C Clincher Wheelset Shimano
List Price: $2475.00
Our Price: $1399.99

*******************************

Calling out to anybody who has a spare Campy 10-speed rear derailleur that I can use for a few weeks. My current one needs some attention off the bike and may well be dead. Trying to avoid buying another one since I'll be getting a loaner returned to me as soon as a certain team gets their new goodies from Shitmano for 2011. Contact me off-forum. Thanks.

Keith Snyder
kpsartless@verizon.net
718 389 2843

more pics here http://smg.photobucket.com/albums/v33/fatallightning/bikesale/

the frame to this. paint is crummy. parts were sanded to try and find a serial number.53cm cannondale 2.8, 54 tt. carbon fork from a later bike. FD braze on removed, use a clamp on. $75


the frame to this. giordana tt frame. 650 front. 127 spaced, i've had a 130 on it for a while. effective tt around 54, stamped 52 on bb shell. made in italy by billato. unknown columbus tubing. paint has a few nicks and scratches, but not bad for an early 90s eye tay frame. no rust. will throw in a 650 tubular front wheel, no tire. $300?

I'd maybe take the cannondale frame - is the headset / seatpost inclueded?

Posted By: lionofbrooklynI'd maybe take the cannondale frame - is the headset / seatpost inclueded?

i have the ugly (was painted, poorly) but functional seatpost, headset i do not, but i could get one for shop cost. a new cheap tange or ritchey is like $15

Eggbeater Pedal Sale at Competitve Cyclist - today only
http://www.competitivecyclist.com/product-road-bike-root-category/2011-crankbrothers-eggbeater-3-pedals-7822.2613.0.NONAV.html

For Sale: Orange Fizik Arione CX with Kium rails

used for a month. In very good condition.

Orange with yellow ":K" on wide area in back, yellow "arione cx" on sides of nose and black "test" under the K. It was from their tester line.

Orange. Kissena color.

$90

JP

1 thing for sale, 2 for free

for free:
(both taken)

for sale: uvex FP 1 helmet. 240 grams, size medium, 55-59 cm

this is a really nice light helmet, never worn outside, just a little too small for my head. it is white. retails for close to $200. I'd say "new in box" but I took off the tags and have the wrong box. Let me know if you want any of the above.

Mike

Hey folks. I'm cleaning out my parts bin.

-Cinelli 64-40 Giro d’Italia bars. Drops were trimmed slightly. $15.
-Used 53/39 130 bcd chainrings - Dura Ace inner, Suntour Superbe Pro outter. life left in 'em (that is, not sharkfinned). $15.
-Stronglight ⅛” 130bcd 48t track ring. $25
-Stronglight ⅛” 130bcd 46t track ring. $25
-Syntace 120mm, 6deg, 25.4 1 ⅛” stem. $5

-105 Octalink BB, english threaded, for triple. Free
-Araya hard-anodized 28h 650 rim. Free

As the president of Kissena I get random clothing emails. Some of these I feel I should pass along to the membership. Apparently Rock Racing is having a final sale with 70% off of gear. So this appears to be your last chance to get your own replicas of some of the most garish kits to ever grace the domestic racing scene.

http://shop.rockracing.com

Mattie - can you contact me off list - I don't have your email.

vfxsuper@gmail.com

Rock Racing clothes? Ball is going to jail...I guess he's going to need the cash to buy cigarettes and razor blades when he gets inside. (u can't see me..but I'm doing that stupid reverse "hook em horns" thing he does)

Yacks, the clothes are being discounted because they no longer come with EPO stored in Ball's refridgerator.

This post is a trial balloon for my time trial frame. I will gather pictures and all the other info if there is any interest.
Here are the basics:
Element 6 frame (http://www.element6bikes.com/tt.html) size Medium. Bought used last winter and ridden less than 800 miles. I know, that's lame but things didn't go as planned. Time to shed the extra equipment. The website has geometry but the TT is 54cm. A little small I came to realize. Very low profile/short head tube but still a lot of steer tube left. I will get specifics soon.
I LOVED riding this frame. For a TT rig it handles really well and felt crazy stiff while only being 1300g complete. My whole build was very light-I would guess around 17lbs with the carbon wheels. The proprietary seat post and all the connections were easy and solid. The internal cables were a pain but I left the housing in tact so only the actual wire has to be run to build the bike. I also have appropriate brake bolts and a nifty custom made rear derailleur jig that reduces rear cable friction along the bend from chainstay to derailleur. Mark Purdy installed it and it helps with shifting on internal cabling.
I also have various parts but I will make a full listing and write it all up soon.
If anyone is considering building a TT rig for 2011 this would be a pretty cheap, very solid start. I'm more than happy to assist any club member or friend of in building the bike as well. I'd like to get $500 for the frame but in light of my terrible financial place I'm very flexible.
I will spending the last half of january and much of february in texas. I leave jan 15. I'd love to sell it before then.
If this is of interest contact me off-forum and I will get you the rest of the info and answer any questions.
Other basics:
English BB
1 1/8" steerer w/ all carbon spacers. Probably around 80mm steerer left above headset.
VERTICAL drop outs! WAAAAAAAY easier.
Seat post included. Double bottle cage mounts.
The bike was probably a little small for me. I was really close to having a good position but I'm built rather oddly. I would guess that this frame would fit a pretty wide range of people with the proper stem/bars, etc. The important measurement is the top tube.

Thanks,

keith snyder
kpsartless@verizon.net

Kissena wind vest. Size Large. 2009 (pre Brickwell cycles). Brand new - in unopened packaging. Just found it in my closet and surplus to requirements. $25.

SRM wired powermeter. FSA K-Force carbon cranks. 170mm. 53-39 and 50-34 chainring sets. Black PC-V control. All manuals, cables, chargers, sensors, included. Very good cosmetic condition. New batteries and calibration done by SRM in October 2010. Brand new english thread Mega-Exo Bottom bracket included. Only thing you will need to buy is the FSA/loctite compound for crank installation ($16). I would like $1300.

Full carbon clincher wheelset. Edge Composites 1.45 clincher rims. Alchemy Elf/Orc hubs. Sapim CX-Ray spokes: 20 Front, 24 Rear. These are stiff and light at 1290g for the set. 8 Months old and I've put about 2000 miles on them. They are in mint condition. You will need carbon brake pads (I recommend Edge/Enve own brand). I will include a pair of Carbon-Ti titanium skewers (50g) if I get full asking price of $1800.

SRM and wheels will go onto Ebay next weekend (1/16).

PM me or call 646-404-3572 if interested.

Ian

FOR SALE
THERMAL JACKET CHAMPION SYSTEMS SIZE LARGE PRE BRICKWELL $25
S/S JERSEY PRE BRICKWELL SIZE LARGE $10

reposted for Mark Taylor in the appropriate thread

Posted By: mark taylorFOR SALE
THERMAL JACKET CHAMPION SYSTEMS SIZE LARGE PRE BRICKWELL $25
S/S JERSEY PRE BRICKWELL SIZE LARGE $10

ill take both if they are still available
-Leonard
LeonardKlipper@gmail.com

Leonard
all yours ,pick up 28th & broadway mon-friday 9-5

mark

Not to be Mr. Snarky, but we already have a buying/selling/marketplace thread; let's use that instead of clogging the forum with threads for specific items.
Also, the "whisper" function is good for one-on-one interactions - similar to responding "offlist" on the old listserv.
:thumbup:

This thread needs to be made into its own category so that Items that are for sale can have their own specific thread. Right now it reads like a shopping list for BJs or Costco.