Kissena Forum Archive

Bicycle Tech/Gear Discussion Thread

8105 comments · 108281 views

Spending some time here in Hawaii with tire engineers from Bridgestone. Fascinating conversation about how winter/snow tires for cars work. Makes me think maybe throwing mud tires on in snow conditions is NOT the way to go. Must ponder more.

Spending some time here in Hawaii with tire engineers from Bridgestone.

Spending some time here in Hawaii with tire engineers from Bridgestone. Fascinating conversation about how winter/snow tires for cars work. Makes me think maybe throwing mud tires on in snow conditions is NOT the way to go. Must ponder more.

i saw one of these in CP this morning:

http://www.razik.com/

it was 5:30AM, dark, and I was technically still asleep but it blew my mind. 

has anyone had any experience with them before?


^Insane
ugly bikes are not pretty.
Oh boy - I suppose it was an inevitability given that Hotlist finally upgraded his bike.

http://redkiteprayer.com/2015/11/mass-extinction/

At supercross, I lost one of the spikes on my MTB shoes. Got new spikes, but as feared, the thread in the shoe is completely gone.

Other than buying new shoes, any ideas on how to fix?
put a nail clean through the shoe?
Affix it permanently with epoxy? 
Epoxy FTW.  I'm a big fan of Loctite stuff:

http://www.loctiteproducts.com/p/epxy_weld_t/overview/Loctite-Epoxy-Weld-Bonding-Compound.htm

http://www.loctiteproducts.com/p/13/7/epxy_mrn_s/overview/Loctite-Epoxy-Marine.htm
Thanks for the suggestions. Will give it a shot with the epoxy first. How should go about it? Planning on epoxy in the hole and then simply before cured, the spike in there. Hoping it holds.
I'd suggest plumbers tape (aka teflon tape) if there's any thread at all, before epoxy.
Obviously, easy enough to give a shot with teflon tape, so I'll try. But there appears to be no thread at all, ie, the new stud doesn't bite into anything at all.

(possibly, the whole thing came off with the spike, and what's left is an empty rubber hole)
How about re-tap the threads? It's possible that Redbeard has a tap and die set that'll do the job. I can tell you when I was in SF a couple of months ago my derailleur hanger threads were stripped and a bike shop was able to re-tap the threads. (I should give a shout out to Huckleberry Bikes: http://www.huckleberrybicycles.com)
Epoxy that sucker in.


happy to report that that the JB weld held the spike in place during Sunday's race.
Interesting that chain stretch is not always consistent across length of chain:
http://velonews.competitor.com/2015/12/bikes-and-tech/technical-faq/technical-faq-chain-wear-measurement_390085
Speaking of stages power from the sponsor thread...I noticed during the last few indoor rides that our 15+ year old microwave scrambled the signal causing the ant+ dongle to lose connection or give false power numbers in short bursts. So sometimes it'll cut out power and others I'll be doing 2400watt sprints. Funny stuff. Otherwise it is more stable since the firmware updates as well as manually entering in the ID into the Garmin instead of auto pairing it.
Speaking of stages power from the sponsor thread...I noticed during the last few indoor rides that our 15+ year old microwave scrambled the signal causing the ant+ dongle to lose connection or give false power numbers in short bursts.

I bet if you go to JP's training talk, he'll tell you not to microwave your hot pockets *during* the training rides. Wait until after the interval is over to heat up the hot pocket.

Also remember to give it time to cool down after microwaving so that you don't burn the roof of your mouth on the hot cheese. (voice of experience).


If you are indoors and so desire, use bluetooth from your phone rather than ANT and the microwave won't impact the signal.
Let's ask Craig for a microwave sponsor, as the newer models should pair easier.
Or maybe just let's not cook our Ramen while riding the trainer.
Just stick with the omlette: https://www.youtube.com/watch?v=ybFvomdhW2Y
#badhabs
You guys know me waaaaay too well.
Im getting this suckah  ant+ and bluetooth
incoming email, texts & phone calls displayed....u should all get one...so I can continue to mock you all mid-girly man interval.

http://www.excelsports.com/main.asp?page=8&description=Super+GPS+Cycling+Computer&vendorCode=LEZYNE&major=3&minor=2&siteComingFrom=google.com_shopping&gclid=CjwKEAiAhaqzBRDNltaS0pW5mWgSJADd7cYDAW0tS0XHct_qlj_G0chQTuHqSSEb3CsoPMQew9OeWhoC2PXw_wcB
twoyacks said:
Im getting this suckah  ant+ and bluetooth
incoming email, texts & phone calls displayed....u should all get one...so I can continue to mock you all mid-girly man interval.

http://www.excelsports.com/main.asp?page=8&description=Super+GPS+Cycling+Computer&vendorCode=LEZYNE&major=3&minor=2&siteComingFrom=google.com_shopping&gclid=CjwKEAiAhaqzBRDNltaS0pW5mWgSJADd7cYDAW0tS0XHct_qlj_G0chQTuHqSSEb3CsoPMQew9OeWhoC2PXw_wcB
Get a Garmin 520. That Lezyne thing looks like a joke.
eloy said:
twoyacks said:
Im getting this suckah  ant+ and bluetooth
incoming email, texts & phone calls displayed....u should all get one...so I can continue to mock you all mid-girly man interval.

http://www.excelsports.com/main.asp?page=8&description=Super+GPS+Cycling+Computer&vendorCode=LEZYNE&major=3&minor=2&siteComingFrom=google.com_shopping&gclid=CjwKEAiAhaqzBRDNltaS0pW5mWgSJADd7cYDAW0tS0XHct_qlj_G0chQTuHqSSEb3CsoPMQew9OeWhoC2PXw_wcB
Get a Garmin 520. That Lezyne thing looks like a joke.
Seriously Chris. Might as well try and use a cheeseburger for word processing. Welcome to the future. Just open your eyes.
You cut me Eloy...you cut me deep.  Clearly you are in violation of the Dignity for All Students Act.  Bullies aren't cool dude...

http://www.p12.nysed.gov/dignityact/
Yacks is proud to fly his freak flag high, a very cyclist in the US of A thing to do. Keep on shining you crazy diamond.
America!